CDMA PHONE UNLOCK

Unlock CDMA Novatel and Sierra

2010-11-13T09:15:00.016+07:00

In this article I will give some firmware that may be useful for us, all I took from bj-portal.

Some of us may have difficulty after getting a modem or buy a modem from the U.S..

Novatel Wireless U720 Qualcomm 3G cdma USb modem EVDO REV.A.

134 novatel - download

135 sprint - download

Sprint u720 v135 nvt - download

Sprint u720 v145 nvt - download

Verizone u720 v156 nvt - download

Merlin U720 to 134 version - download

WZV U720 sw 160 - download

Merlin U720 to 156 version - download

Novatel U720 VZW 141 FREE - download

Novatel U720 VZW 147 FREE - download

Novatel Wireless U727

Verizone U727 v124 nvt - download

Sierra Wireless Compass 597

Verizon ac 597e FW6.40.1 - download
FOR FREE DOWNLOAD CDMA SOFTWARE >>>>>> check88.info

Inject Number On CDMA Phone and CDMA Modem

2010-02-08T20:41:00.008+07:00

Some CDMA phones or CDMA modem either by technology or 2000-1x EV-DO is not a supply of Ruim to Inject, the thing that's so now I will share some experiences on how inject a CDMA phone or a CDMA Modem.
Some of us might think is very difficult and complicated to use this inject-based device, it may be true, but it is not as complicated as what we think if we knew little of CDMA technology.
Some type phone there are ways to do such a search service programming code, programming service for each phone are different, the example for nokia we must enter * 3001 # 12345 #, or some type Samsung with a "menu +7 +2 +0 , can imagine how complex is to enter a number into the phone or modem inject.
As the previous article I wrote way inject Pantech, not using programming code such as mobile phones, but using free software, such as CDMA Workshop and QPST. Here is how to enter numbers into the phone Ruim or inject modem is enough by using QPST and CDMA or uni cdma workshop, I think all people who love ngoprek phone would have to know the greatness of the above software.
Function Software.

1. QPST
QPST (Qualcomm Product Support Tool) is an application developed by Qualcomm for mobile phones featuring Qualcomm chipset. This feature file explorer, factory test equipment, low-level communication settings, RF calibration tools, roaming list editor, programming tool services, and much more.
QPST is copyrighted, and its use is strictly intended for developers, service providers and maintenance technicians. However, the application has repeatedly appeared on the internet for download. QPST is often the only software that can access the old phones that use Qualcomm's chipsets. This software is often discussed in the forum as a tool to reconfigure the phone.

2. Cdma workshop
Cdma workshop is a software license, but now we download the software free of charge and can find the crack for the software. The function of this software clearly no doubt, with this software you can enter numbers, change ESN, PRL upload, can also be to dismantle the security of our CDMA devices.

3. Uni cdma
Cdma Union serves not far from cdma workshop, cumin cdma Union is not as complete simpler cdma workshop, I really like using this software, because it is very simple and easy to use either to replace or insert Akey ESN and SSD-A and SSD-B .
Well here I will give some insights that might be useful for all the friends, the following ways inject phone or modem that uses Qualcomm's chipsets.
1. Prepare your inject numbers, here we have to have data from a number which we will input into the mobile phone number inject such as Min, Akey or SSD-A and SSD-B, Directory number / card number, ESN is also possible we prepared earlier .
2. Attach the device we are both cdma modem or mobile phone, either serial or USB, which is of course if the USB connections we need to know is where is the location of the USB virtual com port is used.
3. Open cdma workshop, on the menu tab and select phone or modem communications with our PC, and then we select "comX" for after we know where are the com port for the phone or our CDMA modem. After that, click connect and then click QCDM. If connected successfully we will see the writings on the right column.
4. Still with cdma workshop we go into the security tab, here we can make change ESN, see SPC (Service Programming Code) we can choose the type of phone in the "Password (16 digits)". Not all CDMAterdaftar phone or modem in the list, but if we know the 16 digit password, we can custom password by using the column-2.
After a 16-digit sukse enter a password, you also can enter A-key atu SSD-A / SSD-B in Cave tab. We can also upload PRL in other tabs. To enter a number we can use the NAM tab.
5. In addition to using "cdma workshop" to enter a number or min number perngkat setting bebrapa also can use QPST. It's just that QPST can not be used to change ESN and enter A-key.
6. To change the ESN with cdma workshop but can also use the cdma Union, only when using cdma Union we must know the 16 digit phone password all, because it does not provide such direct cdmaworkshop.
All of which made the above will not make a phone or modem to die, because the software process is over not using the flash or format.

Free cdma software can download >>>>>>> check88.info

MOBI MODEM BROADBAND CDMA UNLOCK TO SMART EVDO BROADBAND REV-A

2009-11-17T00:40:00.001+07:00

In past articles I've discussed about CDMA Modem unlock Pantech PX-500, in Indonesia this modem used by Mobile-8 with the product name MOBI Broadband Access, and it is very much at all respond and question the fact that not a few people who fail to do unlock, there is a missing SMS menu, not a few also proved totally unable to even make a call or dial # 777.

In this artkel I will discuss examples of how to unlock the process MOBI CDMA with freq. 800 Mhz and replace with the SMART EVDO with freq. 1900 Mhz.
1. Prepare a CDMA phone, for example, we use the nokia, pair the smart card in nokia phone and turn on the device, after the flame type nam programming code follows * 3001 # 12345 #, look at the menu there nam 1 for min number, then look at the menu ESN in nam programming.
2. Write down or save it in notepad MIN number =xxxxxxxxxx, and ESN number =xxxxxxxx
3. Connect the USB modem cdma MOBI on your PC, look in the Device Manager Control Panel "Packet Pantech Service xxxxxxxxxx" is the port number? (See figure I)

4. Move or change positions to the COM2 port, if you have moved, remove the modem and plug it in again. (See figure II).

5. Perform mobi modem firmware upgrade please use the file called PX-500 to PC5750 can download here. (See figure III)

6. Open QPST EFS Explorer menu, the modem will be detected on com 2, backup files from folder directory nvm/num, stored in a folder to your PC. (See Figure IV)

7. Then go to CDMA workshop to include MIN, PRL (PRL SMART JUMP EVDO here) and change ESN also changed the MNC. (See figure V)

8. After cdmaworkshop close and restart the modem to use software UIM akey reader-writer-calculator to find random akey code. Click generate a-key for a code-key, then click write akey to include a-key on the modem. (see figure VI)

9. After write A-Key finish and restart the modem in, open QPST EFS Explorer menu again then copy back the files from the folder in your PC that you saved earlier in the folder nvm/num on the modem.
10. After that restart the modem, now you've changed the modem in the new provider (SMART EVDO REV-A).

I've done Unlock Pantech cdma modem-px500 more than 20 pieces a modem, not counting the requested assistance through Yahoo Messenger. With me on the way do not have to bother to go to the gallery provider.

WE SELL NEW SMART NUMBER INJEK WITH PRICE RP.25.000.00, YOU WILL HAVE MIN, ESN, A-KEY. TRANSACTIONS IN DO ACCOUNT TRANSFER THROUGH BANK MANDIRI.

SIM Card CDMA Unlock

2009-10-18T01:57:00.001+07:00

I'll give you a way that may be useful for colleagues of all, about how to see the ESN, MIN, A-KEY, SSD-A, SSD-B CDMA operator card so you might try to change the CDMA Cell Phone operators or CDMA Modem inject without coming to your Phone Gallery but can do it yourself.

You just need some software below,
1. QPST works just to detect the CDMA cell phone / CDMA Modem automatically in DM Mode position.
2. CDMA Workshop works to see the SSD-A and SSD-B is also MIN and ESN to the sim card, this software is widely used for CDMA Phone Unlock.
3. A-Key UIM functions Reader to view the A-key SIM Card also write A-key.
All you can download the free http://servicecdma.co.cc/index.php?p=1_5_Download.

Unlock Pantech PX-500 / MOBI

2009-09-30T19:15:00.013+07:00

Pantech as one owner in the world of telecommunications that has a lot of products such as the modem has been working with several operators in the world such as Verizon, Sprint in the U.S. and also Mobile-8 in Indonesia.

Mobile-8 is issued with the name MOBI products work with Pantech, one of the product made MOBI package is PX-500 which is biased EVDO data access. Clearly and specifically with technology-based EVDO broadband connection can pamper customers with high-speed data access.(User Manual PX-500)

Verizon, Sprint, MOBI, TATA, and more cellular operators in the world are already testing the reliability of the Pantech PX-500 is, for loyal customers with service packages then the modem will be the key.

To open the lock of your modem you must first upgrade PX-500 modem to UTStarcom 5750, we provide the following modem unlock tricks PX-500.
1. PX-500 Upgrade: PX-500 to PC5750 Crack.zip
2. Enter the new PRL (according to the operator that you want)can use cdma workshop,for Indonesian operator you can download the PRL writer.
3. To enter or change the ESN number you can use QPST, CDMA-workshop, or Uni CDMA , use the password 101010101010101,
4. To change the user name and password to use bitpim and hex editor, edit the file in the directory / / nvm / num.
5. Make sure you get the A-key of the service you want, there are some operators who use the SSD-A and SSD-B. To enter A-key using A-key writer.

If done correctly will unlock will work.

Solution Unlock Huawei

2009-09-15T23:13:00.015+07:00

Why do many people fail in doing flash or unlock huawei ?

This article I want to give a bit of experience and also had a theory of flashing Huawei phone.

Most of us are failing due to a halt during a flash, so flashing is not done perfectly, so we phone flash or unlock a death total.

How to avoid it?

1. Use Pure Serial cable from a PC Com port (DB-9), and remember the cable must be connected to the voltage Vcc, either external or we can simply take the USB Vcc.
2. If you find that our computer device or a laptop does not have a serial port, use USB to serial cable is correct. Use the cable that had been converted from a DKU-5 with type S / N: WT048000317, because this type of cable has been using the output from the USB Vcc. If you change yourself DKU-5 cable into your Huawei data cable is only necessary to connect all 4 cables, others you can ignore. ( Fig. you can download the http://www.servicecdma.co.cc or http://www.mobiletekno.co.cc ).
3. Use the correct driver, because the moment you enter the USB cable to the computer will be detected by the computer as new hardware with a request to the USB to Serial cable driver, you can download yourself in http://servicecdma.co.cc or http://www.mobiletekno.co.cc .
4. If the driver is installed you should check the Com ports via device manager control panel system. The position of the right port must be less than com 5, if more than 5 com you should remove it manually.

If you have a phone Huawei had already died because of flash, you actually can still flash back, because usually if you flash the wrong computer can still detect phone, or by pressing the # key + 2 + at the same power that is in a position phone download mode.
To erase files and repair your Huawei can download for free at http://servicecdma.co.cc or http://www.mobiletekno.co.cc .
*** Mistakes are learning to succeed.

Unlock Haier

2009-09-06T01:33:00.017+07:00

Haier has recently collaborated with some CDMA operator in Indonesia and in several other countries. Here I will give some way to unlock it brand Haier,

1. Unlock Haier C2000

Download and extract the flash file C2000 unlock & driver Haier, Mini USB cable plugs in it to connect with a PC, point it to drivers coming from you downloaded earlier.
Look at the Device manager on windows system, make sure that the drivers are installed you can see the port. When detected on com port 5 and above, we suggest moving to a lower com, eg, com 4, COM3, etc., to prevent errors when flashing.
Click Dloaderlite.exe file, select the flash file C2000_unlock.bin, select the position used Haier com. Tick column NV backup and restore, and press the start button.
For your dead phone just tick off line mode column.

2. Unlock Haier C6000

To do this type unlock very easy, you live operator input card luggage ( flexi to Indonesia ), then typing the code * 32 # 00 # then call. Search minlock then select minlock off. Done please try with another card.

3. Unlock Haier c2001

Download flash files just because the composition of c2001 with C6000, do like flash Haier C2000 flash file above is only replaced with the downloaded earlier. When finished do like unlock Haier C6000.

If there is a problem you enter comments in this column, I'll help.

Modem CDMA Cheap

2009-08-31T20:42:00.009+07:00

Nowadays a lot of good operators who are competing in terms of price and connection speed internet access, most of them work with third parties to sell the CDMA device with the price of Rp.400, 000 to Rp.600, 000. Of course, we as the user is not necessarily all of them can enjoy the cheap internet access.

Here I will tell the friend all that we really do not have to buy a modem that is too expensive, we still can make inexpensive Internet access devices with very very cheap.

Most of us are always teacher anymore on the modem card to buy expensive, but many Hand phone information with the system on the market that inject cheap. As I bought Motorola T720 Hand phone Rp.75.000 prices, data cable I bought 50,000, flexi card purchase Rp.5000 filled with 15,000 pulses, the total Rp.120.000 we can already use the internet flexinet.

I suppose that over the internet with your use flexi, I think with any operator would be cheaper. If you use the MOBI from MOBILE-8 the count would be much cheaper.

Some of my modem is recommended for Internet access are:
1. Motorola various type of sprint and verizon, download here
2. Samsung various type of sprint and verizon, download here
3. Motorola various type of sprint and verizon, download here
4. Audiovox / Curitel type of sprint and verizon, download here
5. Sanyo type of sprint and verizon, download here
6. Kyocera type of sprint and verizon, download here

Maybe there are still many other brands and types you can use.

Unlock Wimode Sungil SXC-1080

2009-08-28T17:01:00.005+07:00

Some time ago Bakrie Telecom Esia CDMA service issued a product cheaper Internet services wimode, he said wimode is a service high speed internet access with cheap rates.

I as a user when the viking king was very disappointed with wimode Internet access, it is not like in the ad. What I experienced was a low speed, high cost, perhaps in other places are not like that. But honestly I was disappointed.

Finally I find a solution to these wimode I can use another card because I have a modem that SUNGIL SXC-1080 was in lock. Finally I get a solution and I sungil Wimode other operators can be used but with the way in inject.

I've provided for my friends who want to unlock Wimode SXC-1080,

1. Download cc cleaner to clean the old registry to the window.
2. Download drivers SXC-1080 download from here link
3. Download cdma workshop to change the RUIM be Inject, change ESN, PRL includes service on the modems.
4. Download file tool SXC-1080 unlock,
5. Download Flash files for modem SXC-1080 (only used if 1 to 4 are still not able to signal the operator).
** The difficulties downloading Cantact with email.

Before doing the installation, we uninstall the old drivers from the cd wimode innate, then use cc_cleaner to clean the registry files, then install the downloaded driver. After all done using SXC-1080 unlock, unlock your stay just clik and then close, let the modem restart, wait a while, if the red indicator turned blue sign that you are able to signal the operator, you can use cdma workshop to see where the modem service received.

If I do have my items to 5 (to flash the modem), but when I do unlock for the other modem I do not use it, because it could be a signal. Incidentally I now use SXC-1080 using weekly flexinet Rp15.000, 00 to 128 kbps speeds, sometimes also use of mobi from MOBILE-8.

Create a new connection, via add connections, do not use the software to dial wimode up.Harus also note that SXC-1080 that I use is the first version, because he SXC-1080 there are several versions on the market.

TRANSFER DATA / FILES PC & PHONE

2009-08-21T07:11:00.010+07:00

In the data from phone to computer or vice versa sometimes our difficulties because we have to install some software pcsuite is depending on the brand phone.

Sometimes as often replace the phone we always add remove programs to restore the PC performa us, or let it happen so that the error can not even connect to the phone because the crash.

In Ponsel CDMA, mobile phones have some BREW menu, the folder in the phone menu this is usually put files - files that can be taken for or added. But there is also a CDMA mobile phone does not have this menu, do not worry phoncel without the Brew still can connect with in our computer.

One of them we can use the software BITPIM or use easycdma, many of them are running for the upload and download files - mobile phone files.

Using BITPIM.
1. Download software BITPIM,
2. Install the software until it is finished,
3. After the install finished RUN program earlier BITPIM
4. Log in to the View menu, ceklis filesystem view,
5. Go to the Edit menu, settings, search type ponsl you do not forget to select the com port it. If you type your phone is not registered in the list, just select "other cdma phone", then click Ok.
6. Now you click on the file menu to the left window, then click the triangle sign in the middle of the folder, wait until slesai read.
7. If you are finished reading you will see many folders, you click one by one until you can see the files you want, find the folder that the phone memory if you use external memory.

Using easycdma.
1. Download software + crack easy cdma
2. Extract the file and then install it according to instructions.
3. Once finished Run easy cdma program that has been installed before
4. Open help about easycdma
5. Register with a user name and password which is given in the txt file.
6. ENJOY PINKSOFT

Now you can add or reduce the content of the files in the phone only with two software above.

It's easy - all that you have no difficulty in using the software before, I have a problem you can write in ShoutMix chat or post in the command post.

UNLOCK ZTE & REPAIR ZTE

2009-08-16T00:05:00.014+07:00

Some time ago, Flexi's PT. Telkom Indonesia posel out the package with the cost between 1 (one) number with flexi bermerk ZTE CDMA mobile phone C321 type. Similarly MOBILE-8 also with ZTE C300 and C306, is also highly in demand in the market. The ZTE just sit on top with some CDMA operator.

ZTE (Zhongxingxin Telecommunications Equipment Co) is no longer a foreign brand product again for us (huh ???), so cheap Ponsel the rather good in fact this is already good enough market segment to compete with some other brand that is also from China, such as Nexian or Huawei, especially now there are PT. ZTE INDONESIA place in the East Building 27 Mega Kuningan Jakarta 10220.

Market in Indonesia is a soft market for the trademark holder, but may be little concern for the CDMA operator (times ... ..). Besides mobile phones, ZTE also spent some product to access data services such as GSM Modem HSDPA, Modem CDMA EV-DO, also the plane Fix Wirelles Phone, etc..

Ok, now I will give what I have how do we unlock the ZTE package FLEXI KOMPAS ZTE C339 ... ... ... ... eh ... briefly. We are his brothers first ZTE C321 namely, all the same and ZTE C300 and ZTE C306 in Packet fren from MOBILE-8.

Pinouts for cable data ZTE please you take here and here

ZTE C321 type to have some version of the software, to find out when your code is * 983 * 837 # on your phone. Do not see the original version Unlock suddenly full dad his mobile phone. You will see one version of this:

Select which version you ponsel for direct download.

TELKOM_C321_RNTL 35NV1.0.2 B01
TELKOM_C321_RNTL 35NV1.0.3 B01
TELKOM_C321_RNTL 35NV1.0.2 B02

Please download it directly in the hope that is not experiencing difficulties.
Create your never wrong you please try to unlock flash repair its files here. Or you can also with-me-only restore it to its NV.

To type ZTE C306 and ZTE C300 you simply take the file it under.
ZTE C-300 Unlock
ZTE C-306 unlock

For the new version ZTE -C321 and ZTE-C306 can also use this.

Hopefully everything is smooth and there is no error, so that we can use the card for all your service. How?

For you who have ZTE MC0000 error, you can use the flash file below!
C321 Repair part 1
C321 Repair part 2
C321 repair part 3

You wait some more time Allah will give me the unlock ZTE C339 kompas on a different article. Often just drop you in this Blog ok ... .. do not get behind.
Special thnx to mr. brokensword

UNLOCK HUAWEI C2807

2009-08-11T22:22:00.003+07:00

Re-entry unlock C2807

In respect of the case, then some time link cdma huawei unlock can not be open by the friends of all. This time I deliberately repeat articles about mobile phone unlock huawei C2807 type due to a request via email.

Please let me back that the software unlock is only for learning we are, and hopefully can help people and not for business or commercial interests.

Unlock Huawei C2807 for: Slank 1, Slank 2, FU, BALI, NGOCEH 2
All Free ...

Part 1
Part 2
Part 3
Part 4
Part 5

Is the same as the post I have given the software because it is the same.
Please you can download it again when you do not have.

To add a new article, please join and give commentary.

TIPS AND TRICKS stabilize SIGNAL EVDO

2009-08-09T23:48:00.002+07:00

TEST MODEM done on Pantech Mobi Packet sell

After introducing the GSM 3G era that began enjoyed by people in Indonesia although only a few big cities only, we are finally introduced with the new technology called HSDPA, the data access speed of up to 3.2 Mbps. Seemingly does not want to lose CDMA has also been set up weapons be EV-DO and EV-DV.
CDMA 2000 1x technology is still the alternative to GSM and GPRS technology, known as 2G/2.5G. In the era of 3G, technology, CDMA 2000-1x will be evolved into CDMA EV-DO and CDMA EV-DV.
OK, now we will discuss about the EV-DO is used by the MOBILE-8 at the time of this product with a name in the Mobi. Indeed, some operators have already issued the EV-DO technology, such as this and also StarOne SMART. But I only do testing to keep the signal on this Mobi only, and may indeed not what I do also praktekan bias in the service, such as SMART or StarOne.
The discussion this time I as I want to give you how to stabilize the signal EV-DO Broadband Mobi. This is only my praktekan try to connect my modem to use Mobi Pantech PX-1500 and its results was quite good, I usually drop out of the way but can not anymore.
This trick may also be used to CDMA modem other than the Pantech PX-1500 Packet of mobile-8.

This is very traditional but the smell modern times ... ... ....
1. Prepare the strip CD / VCD / DVD that is not used anymore, but it should be the original or the surface of silver (not a blank CD).

2. Enter cd to perforation of the antenna on the modem, that modemnya must use an extension cord is not nempel in your PC or laptop. If using an extension cord must be of high quality cable, because cable is usually a low quality modems result in error or not terdetesi.

For more details please donload
>>>>>>>>> here <<<<<<<<<<<

Yap .... with just two easy steps that now I no longer lack of signal Broadband, a very easy.

Sorry I do not discuss here the reason why only the signal bits cd just so good and more stable, you can search for materials are used to make a cd so that it can strip to add EV-DO signal.

Troubleshooting & Unlock CDMA Nexian

2009-08-01T19:06:00.007+07:00

Due to the large number of CDMA mobile phone Nexian with different type, then we will be here a little membahasnya. In general, this phone is not much different from the mobile phone, china mobile phone, in general, ranging from the cheap price, feature the full rate is friendly to use, especially now it is out products that are similar to BlackBarry.

Price offered by the manufacturer is will be spend pocket too much because they are usually in cooperation with both parties in this case the Provider, such as CDMA Mobile-8, Esia, Flexi GSM provider and also as a program with BUNDLING XL.

Damage to the Nexian occurred because PCB is generally used very thin, so bad was not too difficult, which we are a little courage. Rarely occurs because of damage softwatre error, but most occur due to excessive heat, stored in a pants pocket, a result that is the thin PCB because some components on the board does not stick to it.

Here we will only provide ways of overcoming the damage because the damage that occurred because it is a quality of material used by the PCB Nexian.

Here I give tips and tricks you perform before flashing the firmware, you die because HP is not necessarily damage the software.

That happens frequently CASE
- SOME KEY Keypad not function
- Appears only initialisation
- HANG
- Restart
- only glowing keypad
- total dad (EVEN IF glowing keypad GAK) NOT FOR ANY OF FLASH

The solution
- SOME KEY Keypad not function = REHOT CPU ONLY
- only command initialisation REHOT = CPU FLASH IC FLASH ROM ULANG ONLY CP
- HANG REHOT = CPU FLASH IC FLASH ROM ULANG ONLY CP
- Restart = REHOT IC FLASH ONLY
- only glowing keypad = "Blue"] REHOT CPU FLASH IC FLASH ROM CP ULANG ONLY [/ color]
- total dad (EVEN IF glowing keypad GAK) NOT FOR ANY OF FLASH = "Blue" REHOT CPU FLASH IC FLASH ROM CP ULANG ONLY [/ color]

IN NEED OF NOTE
- be carefull in REHOT doing, DO NOT TOO LAMA (2 min), evenly Strive In, in continuous flux
- Strive REHOT CHECK IN AFTER DIRECT, Modem BATRE, press ON glowing keypad MUST BE MORE OF 2 sec, IF MORE FROM glowing keypad sec 2, DOS REHOT BACK
- Glowing keypad AFTER BEFORE IN ON 2 sec, FUNction to do the order for FLASH ROM succes CP. The problem is caused false CP FLASH ROM CAN NOT accept POSITION IN CPU
- DO NOT do it BOOT FLASH IC FLASH POSITION If the weak can full dad (MUST LABTOOL).
- Repeat Again failing how way THE ABOVE

You can download the software for free Nexian here:

Nexian tutorial
USB Drivers part I
USB Drivers part II
I Viapim Setup
I Viapim Setup
VPST3.0.10_Setup_for_Dragon
Phone_Unlock
UNLOCKER Provider

I'm so over the files before us is only for learning only, because I assumes, we buy something that is right for us to make anything any earlier. I am pleased that in this blog we can together to exchange ideas and learn together for the betterment da INDONESIA Prosperity, we must remember not to be a big Burden to the small but we can still help him.

Hopefully God can increase our knowledge together .......... Amen.

NAM PROGRAMMING CDMA

2009-07-29T22:20:00.001+07:00

Audiovox

Audiovox 4000, 9000, 9100, 9155, 9500 Code for NAM Programming Mode:
Nam Set: [2][8][9][fcn][#][1]
Debug menu : [fcn][0][0][fsc]
Test Mode: Hold [2][*][Rcl][Power]

Audiovox 107 Nam Programming:
Nam Set: [4][5][6][8][0][*][4][7][*][8][6][9][#][1]

Audiovox 9950 Nam Programming:
Nam Set: [#][#][3][2][8][2]

Curitel

Curitel 100, 510, 520 Code for NAM Programming Mode:
NAM Set: [#][#][2][0][0][2][2][0][0][2][PWR][1][ SPC CODE ]
Field Teste :[#][#][2][0][0][2][2][0][0][2][PWR][1][ MASTER CODE ]
Enter A-KEY: [2][5][3][9][*][*]
Debug Menu: [#][#][2][7][7][3][2][7][2][6][PWR]
SAR Test: [#][#][2][7][7][5][2][3][4][5][PWR]
Baud rate: [#][#][3][6][*][*][PWR]
DM mode Enable:[*][*][1][0][0][4][PWR]
DS mode Enable:[*][*][1][0][0][5][PWR]
Test Bell/Led/Voice/Dot:[#][#][1][1][2][2][PWR]
RF mode: [#][#][2][2][4][0][PWR]
RAS RAM: [#][#][2][7][7][4][PWR]
CMUX 1:[*][*][0][4][8][1][PWR]
CMUX 2:[*][*][0][4][8][2][PWR]
RX mode FAX:[*][*][0][4][9][2][PWR]
RX mode DATA:[*][*][0][4][9][1][PWR]
RX mode RESET:[*][*][0][4][9][0][PWR]

Curitel 525, 550 Code for NAM Programming Mode:
Debug Menu [##*193*762534#*][PWR]
SCI DTMF TYPE [##13*92*#62*][PWR]
TEST BELL VIB LCD VOICE [##22635*262*][PWR]
CMUX 1[***12*#811#][PWR]
CMUX 2 [***37*#922*][PWR]
RX MODE RESET [***64*#133#][PWR]
RX MODE DATA[***83*#247*][PWR]
DS MODE ON [***12045#*#][PWR]
RF NV INIT [##0*#*63861829372#][PWR]
RAS_RAM [##3*13091#1279#*][PWR]

Gtran

Gtran 2000 Code for NAM Programming Mode :
Nam Set:[0][1][#][7][3][7][ SPC CODE ]
Debug menu: [0][1][#][3][2][4][ SPC CODE ]
Debug Screen : [0][1][#][7][2][7]
Test mode: [0][1][#][7][6][4][ SPC CODE ]
System test mode: [0][1][#][7][6][8][ SPC CODE ]

Gtran GCP 5000 Code for NAM Programming Mode :
Debug Screen : [0][1][#][7][2][7]
Test mode: [0][1][#][7][6][5]

Hyundai

Hyundai HWP-110 NAM Programming:
Nam Set: [#][8][6][9][0][4][*][*][8][9][3][9][7][#]
DM Mode: [#][#][2][7][4][0][*]

Hyundai HGC 120e, 130e Code for NAM Programming Mode:
Nam Set: [#][8][6][9][0][4][*][*][8][9][3][9][7][#]

Hyundai HGC 310, 600, 610 Code for NAM Programming Mode
Nam Set: [#][#][2][0][0][2][2][0][0][2][PWR][1][ SPC CODE ]
Field Teste :[#][#][2][0][0][2][2][0][0][2][PWR][1][ MASTER CODE ]

Kyocera

KYOCERA 2035, 2135, 2255, 2345, 5135, 6035, SE47 NAM Programming Mode:
Nam Set: 111111 [OK], Select “Programming”+Spc
CAI Change: [#][#][7][7][3][8][ok]
Enable TTY: [#][#][8][8][9][ok]
Life Timer, PRL, etc: [#][#][7][8][6][ok]
A-key: [#][#][2][5][3][9][ok]
A-key: [2][5][3][9][ok]

LG Electronics

LG LGC 300 Code for NAM Programming Mode:
Nam Set: [ MENU ][9][ SPC CODE ]
A-Key: PUSH [ STO ] 3 SEC. [2][5][3][9][*][*]

LG LGC 330W Code for NAM Programming Mode:
Nam Set: [ MENU ][4][0][ SPC CODE ]
A-Key: [2][5][3][9][*][*]

LG LGC 800W, 500 Code for NAM Programming Mode:
Nam Set: [ MENU ][9][0][ SPC CODE ]
Debug Mode : [ MENU ][7][0][ FSC CODE ]
Debug Mode : [ MENU ][8][0][ FSC CODE ]
A-Key: [2][5][3][9][*][*]

LG LGC 510 Code for NAM Programming Mode:
Nam Set: [ MENU ][3][0][ SPC CODE ]
A-Key: [2][5][3][9][*][*]

Motorola

Motorola 7760, 7860, 2260, 8160 Code for NAM Programming Mode:
Nam Set: [ FCN ][0] [0][0][0][0][0][0][0][0][0][0][0][0][ RCL ]
Test Mode : [ FCN ][0][0][*][*][8][3][7][8][6][6][3][3][ STO ]

Motorola V60c, V120 Code for NAM Programming Mode:
Nam Set: [7][4][6][6][3][#][Menu][Menu][ SPC CODE ]
Test Mode : [Menu][0][7][3][8][8][7][*][ SPC CODE ]

Motorola v710, v730, v740 Code for NAM Programming Mode:
Nam Set: [8][3][7][8][*][#] press 3 times NATE [0][7][1][0][8][2]
Test Mode: [Menu][0][7][3][8][8][7][*][0][7][1][0][8][2]
Service Menu: [#][7][5][8][3][5][3][2][6][6][#][6][4][6][#]

Motorola v720 Code for NAM Programming Mode:
Nam Set: [0][7][3][8][8][7][*]
Test mode: [8][3][7][8][*][#] [Pres Tape Butone 3 Time]

Motorola V6060 Code for NAM Programming Mode:
Nam Set: [1][4][7][*][3][6][9][#][4][5][6][*][0][#]

Motorola MC150 Code for NAM Programming Mode:
Nam Set: [0][1][7][0][8][2]
Test mode: [8][3][7][8][*][#][Pres Slide Buton 3 Time]

Motorola MC200, MC230, MC250, MC280, MC300, MC500 NAM Programming:
Nam Set: [5][7][5][9][7][8][9][*][#][Cam Buton 3 Time][9[1][5][0][3][7]

Nokia

Nokia 5185, 2112, 3285, 6225, 6585, 8280 Code for NAM Programming Mode:
Nam Set:[*][3][0][0][1][#][1][2][3][4][5][#]
Software version:[*][#][8][3][7][#]
Software version:[*][#][9][9][9][9][#]
Serial / ESN:[*][#][9][2][7][7][2][6][8][9][#]
Phone restart:[*][#][7][5][6][8][1][#]
Phone restart:[*][#][7][5][6][8][2][#]

Nokia 8587 Code for NAM Programming Mode:
Nam Set:[*][#][6][2][6][#][7][7][6][4][7][2][6][#]
Version :[*][#][0][0][0][0][#]
Vocoder :[*][#][3][8][7][2][#]
Debug Screen :[*][#][8][3][7][8][#]
Debug:[*][#][8][3][8][0][#]
Field test menu :[*][#][8][3][7][8][8][#]

Nokia 8887 Code for NAM Programming Mode:
Nam Set:[*][3][0][0][1][#][1][2][3][4][5][#]
Version :[*][#][0][0][0][0][#]
EVRC :[*][#][8][3][7][8][#]
SERIAL :[*][#][9][2][7][7][2][6][8][9][#]

Pantech

Pantech HX550C Code for NAM Programming Mode:
Debug Menu [##*193*762534#*][PWR]
SCI DTMF TYPE [##13*92*#62*][PWR]
TEST BELL VIB LCD VOICE [##22635*262*][PWR]
CMUX 1[***12*#811#][PWR]
CMUX 2 [***37*#922*][PWR]
RX MODE RESET [***64*#133#][PWR]
RX MODE DATA[***83*#247*][PWR]
DS MODE ON [***12045#*#][PWR]
RF NV INIT [##0*#*63861829372#][PWR]
RAS_RAM [##3*13091#1279#*][PWR]

Qualcomm

QUALCOMM QCP 800 Code for NAM Programming Mode:
Nam Set: [ MENU ][3][0][ SPC CODE ]
Field test : [ MENU ][7][0][ FSC CODE ]

QUALCOMM QCP 820 Code for NAM Programming Mode:
Nam Set: 111111+Jog Dial(Ok), Select “Programming”+Spc

QUALCOMM QCP 860 Code for NAM Programming Mode:
Nam Set: [ MENU ][8][0][ SPC CODE ]
Field test : [ MENU ][5][0][ FSC CODE ]

Samsung

Samsung e170, e250, e300, X-series, etc Nam Programming:
Nam Set: [6][5][4][8][#][0][*][*][4][#][6]
Test Mode: [5][8][0][9][5][4][0][*][4][5][6][8][0]
Debug Menu: Menu(2sec) [0][6][7][2][5] or
Debug Menu: Menu(2sec)[9][7][2][0]

Samsung sph-n240, n400, a460, a500, Code for NAM Programming Mode:
Nam Set: [#][#][Spc]
Test Mode: [4][7][*][8][6][9][#][1][2][3][5]
Debug Menu: [#][#][3][3][2][8][4][ok]
Service Menu: [Menu][8][0][#][8][8][9]
Reset , Clear Memory: [#][#][7][8][6][ok]
A-key: [#][#][2][5][3][9][ok]
Label Selection: [#][#][3][8][8][2][ok]
Label(Home, Work, etc) :[*][*][5][2][3][ok]
NGG Setting (Gateway, etc.): [#][#][2][7][6][9][7][3][7][ok]
Vocoder: [#][#][8][6][2][6][3][3][7][ok]
CAI Change: [#][#][7][7][3][8][ok]
Enable TTY:[#][#][8][8][9][ok]

Samsung SCH A300 Code for NAM Programming Mode:
Nam Set: [ MENU ]
Test Mode: [4][7][*][6][8][#][1][3][5][8][0]

Samsung SCH 470, 570, 670, 611, 811, N101, A100, A105, A300, ?2000
Nam Set: [4][7][*][8][6][9][#][0][8][#][9]
Test Mode:[*][7][5][9][#][8][1][3][5][8][0]
Test Mode: [5][8][0][9][5][4][0][*][4][5][6][8][0]
A-key: [Menu][0][2][5][#][#]
External Audio: [Menu][0][#][#][#][#]
Debug Menu: [Menu][8][0][4][1][5]
Brief NAM Programing: [Menu][4][0][6][2][6] (not all version)
LCD Contrast: [Menu][4][5] (not all version)
SIO Mode: [Menu][4][9]
SIO Mode: [Menu][6][9]

SK Teletech

SKY-IM 1000, 1400, 2000, 2200, 2400 Code for NAM Programming Mode :
NAM Set : [#][7][5][8][3][5][3][8][3][2][4][#][6][2][6][#]
Test Mode : [#][7][5][8][3][5][3][8][3][2][4][#][8][3][7][8][#]

SKY-IM 7100, 7200, 7300, 8300, 8500 Code for NAM Programming Mode :
Nam Set:[*][7][5][9][#][3][6][4][*][7][3][8][8][4][6][4][#]
Min Simple Mode [#][7][5][8][3][5][3][2][6][6][#][6][4][6][#]
Test Menu [#][7][5][8][3][5][3][8][3][2][4][#][8][3][7][8][#]
Enter A-Key [#][7][5][8][3][5][3][2][6][6][#][2][5][3][9][#]
Voice Memo [#][8][7][6][7][#][2][7][7][#]
IRM Simple Mode [#][7][5][8][3][5][3][2][6][6][#][4][7][6][#]
Change Data [#][7][5][8][3][5][3][8][3][2][4][#][7][5][2][3][#][8][3][7][8][#]

Synertek

Synertek S200 Code for NAM Programming Mode :
A-KEY [2539**][SAVE]
Test mode [MENU][0][ Field Service Code ]
Debug screen [##33][SAVE]
Debug screen [##523][SAVE]
RF Test [####][SAVE]
LCD type change [##325][SAVE]

Synertek S500 Code for NAM Programming Mode :
SAR Test Strife test[*][#][0][0][0][0][#]
Debug screen[*][#][8][3][7][8][#]
Clear LCD[*][#][8][4][8][3][7][8][#]
Debug menu, R UIM Enable[*][#][4][4][3][3][3][6][#]
CDG , Service option[*][#][2][3][4][#]
Function Test, LCD Contrast[*][#][8][7][8][#]

Sanyo

Sanyo SCP 5300 Code for NAM Programming Mode:
Nam Set : [#][#][ SPC CODE ][ OK ][ KEY DOWN ][ OK ]
SET A-Key[#][#][2][5][3][9][ OK ][ KEY DOWN ][ OK ]
View Version [#][#][*][*][8][3][7][ OK ][ KEY DOWN ][ OK ]
Debug Mode:
[ FSC CODE ]=040793
Debug Menu[#][#][ FSC CODE ][OK][KEY DOWN][OK]
VIEW/CHANGE CAI [#][#][7][7][3][8][OK][KEY DOWN][OK]
Set Vocoder [#][#][8][6][2][6][3][3][7][OK][KEY DOWN][OK]
Reverse Logistic [#][#][7][8][6][OK][KEY DOWN][OK]
Set IP Adress [#][#][2][7][6][9][7][3][7[OK][KEY DOWN][OK]
Accessibility (TTY ON/OFF)[#][#][8][8][9][OK][KEY DOWN][OK]
Advanced Data [#][#][3][2][8][2][OK][KEY DOWN][OK][MSL CODE]
Ready Link [#][#][4][6][3][6][OK][KEY DOWN][OK]
Browser init (ON/OFF)[#][#][4][6][8][2][OK][KEY DOWN][OK]
Picture Token [#][#][2][5][3][2][7][OK][KEY DOWN][OK]

Ubiquam

Ubiquam U 100 Code for NAM Programming Mode :
BREW setup menu : [#][#][2][7][3][9][*][#][7][3][8][*][PWR]

Withus

Withus wce-100, 200, 300, NAM Programming:
Nam Set: [#][#][9][4][8][4][8][7][Save]
Nam Set: [#][#][9][4][8][4][8][2][Save]
WCE-200 ESN write: [#][#][6][6][8][3][5][Save]

Other Setting Used
AUDIOVOX 8910 = ##27752345
AUDIOVOX 8910 = ##737247
AUDIOVOX FT 3200 = 45680*47*869#1
COMPAL = **321456987##
EPSILON = **321456987##, **3214569871472365##
Kyocera KX-2 = 111111
LG DM510 / DM150 = menu 3 0
LG SV590 = Menu 0, SPC code : 852456 a-key : *542362*2539*
LG 2130/2230 = #542362#*542362*
LG VX3200 = Menu 0 (000000)
LG VX9800(the V) = 3477247, CLR, CLR, 1
LG 5130 = #542362#*735130*
LG 6130 = #542362#*736130*
LG 5550 = ##7764726 save
LG PM-325 = ##2342# AKEY : ##2539#
NOKIA 3586i = *3001#12345#
NOKIA Sprint = ##3282#
NOKIA 8587 = *#626#7764726#
SKY 1400 / 3000 / 5000 / 5100 / 5400 = #7583538324#626#
SKY 5400 / 6100 / 6200 = *759#626*7388464#
SKY 6400 = *759#364*7388464#
SAMSUNG A740 ( BELL )/A860 ( BELL ) = ##675 OK
SAMSUNG A530/A620/N195/N356 = menu 6 *
SAMSUNG N362 = 4367905#*10*#*913620
SAMSUNG A460/N240/A500/N400 = ##000000
SAMSUNG A610 = menu 9 *
SAMSUNG A630 = menu 5 *
SAMSUNG A300/N105/A100/A562/A611 = 47*869#08#9 and menu 6 0
SAMSUNG A560 = ##3282#
SAMSUNG A660 = menu ##000000 ok and ##3282 ok
SAMSUNG A670 = menu 7 2 * (000000)
SAMSUNG A680 = ##000000##
SAMSUNG A790 = menu 0 and menu 2 0
SAMSUNG A860 = menu, setting *
SAMSUNG X, E, V-Series = 6548#0**4#6 and 47*869#08#9 and 74153697193
SAMSUNG E300 = 741 53 697 193
SONY ERICSSON T608 = 923885
TELSON = 320 menu 4 0 (000000)
MOTOROLA V710/V265 = menu 073887* (000000)
Motorola RAZR V3 (americ) = #073887*
MOTOROLA MS600 = 5759789*# 3 (915037)
MOTOROLA V8160 = FCN 00**83786633 STO 32# 01#
MODOTTEL (Withus) W100/200/300 = ##948487 ok
VK X100 = 153147539741593 + TV
VK C200 = 02147*869#08#91 + Up Arrow
Z T E 150 = *983*3641#
DAXIAN = #*2180032*#
A-KEY CODE
HYUNDAI 310/610 = 2539 menu menu
NOKIA 3586/3588 = 2539 end end
2539**
2539, OK
#2539#
##2539
##2539#
#758353266#2539#
Menu, 0, 25##
5759789*#
SPC CODE
000000 (GENERAL)
852456 (LG)
123580 (MOTO)
071082 (MOTO)
072096 (AUDIOVOX)
843691

Unlock CDMA Phone

2009-07-28T22:02:00.006+07:00

Ponsel CDMA Unlock

In the world, there are many different companies selling phone type, they try to do is to increase the benefits that they can. That is why many telecommunications companies in the world working with the distributor telephone do "BUNDLING" plane with the cheap price. The other side of many consumers feel frustrated because their telephone or HP can only be used by one (1) operator course, they eventually find way that aircraft before the phone can be used for other operators. There is also a new purchase in the open to try to lock on the plane.

In the mobile phone cdma also have many features that change when you do "unlock" so the menu eg increased or decreased, or features of the language so much more, as an example many people do unlock the phone so that it can support to the Hindi language, and can also for other languages.

If you have a Nokia phone and you are looking for ways to make "unlock" the phone cdma many ways that you can do to unlockyour phone. Many people search the Internet to find ways so that they can phone in the unlock.

Do not be afraid to post later We provide ways unlock various brand CDMA mobile phone.

Why Choose CDMA ...??

2009-07-28T00:03:00.004+07:00

Advantage CDMA .
CDMA technology itself has various advantages when applied in mobile systems. Benefits include:

* Only need one radio is required for some sectors / cell
* Equalizer does not need to overcome the interference signal spectrum
* Be able to join with other access methods, does not require the time (guard time) to see time and guard band (guard band) to keep the intervention antarkanal
* Does not require the allocation and management of frequency
* Has the capacity to smooth the user to restrict access
* Have the protection of the tapping process.

in Fixwireless and CDMA Mobile Phone also Data Access
A number of different terms used to refer to the implementation of CDMA. Standard who first initiated by QUALCOMM was known as IS-95, IS refers to an Interim Standard of the Telecommunications Industry Association (TIA). IS-95 is often referred to as 2G or second generation cellular. CdmaOne trademarks of QUALCOMM is also used to take the 2G CDMA standard.

After several revisions, IS-95 is replaced by the standard IS-2000. This standard was introduced to meet several criteria in the existing IMT-2000 specification for 3G, or third generation mobile. This standard is also referred to as 1xRTT which simply means "1 times Radio Transmission Technology" which indicates that the IS-2000 using the channel with 1.25-MHz is used as the standard IS-95 of the original. A related scheme called 3xRTT bearer channel using three 1.25-MHz wide band to a 3.75-MHz that allows the rapid explosion of data (data burst rates) is higher for an individual user, but the scheme has not been used 3xRTT commercial. The latest, QUALCOMM has led the creation of new technology, called CDMA-based 1xEV-DO, or IS-856, which is able to provide packet data transmission rate is higher as required by IMT-2000 and desired by the wireless network operator.

QUALCOMM CDMA system includes a signal that time is very accurate (usually referring to a GPS receiver at the central station cells (cell base station)), so that the hours-based CDMA mobile phone is the type of day that the popular radio for use on the network computer. Main advantage using CDMA mobile phone signals for reference day is that they will work better in the building, so that removes the need to install a GPS antenna outside the building.

Which is also often dikacaukan with CDMA is W-CDMA. CDMA technique is used as the principle of the air interface W-CDMA, and the air interface W-CDMA is used in the global 3G standard UMTS and the Japanese 3G standard FOMA, by NTT DoCoMo and Vodafone; but anyway, the family CDMA standards (including cdmaOne and CDMA2000) are not compatible with W-CDMA standard.

Other important applications of CDMA, and precede all of the different cellular CDMA, is the Global Positioning System, GPS.

High-Speed Downlink Packet Access (HSDPA) is a protocol and mobile phone technology, sometimes referred to as 3.5 G.

First phase with a HSDPA 4.1 Mbps. Then, following a phase 2 with a capacity of 11 Mbps and maximum downlink peak data rate up to 14 Mbit / s. This technology was developed from the WCDMA the same as EV-DO CDMA2000 develop. HSDPA provides evolution path for network Universal Mobile Telecommunications System (UMTS), which allows for the use of data capacity is greater (up to 14.4 Mbit / sec down direction).

HSDPA is an evolution of W-CDMA standard and is designed to increase data transfer speeds 5x higher. HSDPA memdefinisikan a channel W-CDMA is a new, namely high-speed downlink shared channel (HS-DSCH), which is operating with a different channel W-CDMA is now. Up to now only the use of HSDPA technology in the communication under the direction of mobile phone.

EVDO, also known as EV-DO, 1xEvDO and 1xEV-DO is a standard in high-speed wireless broadband. EVDO stands for "Evolution, Data Only" or "Evolution, data optimized". Term issued by the authorized Telecommunications Industry Association is CDMA2000, is a high-speed data interface on the media air. EVDO one of two main kinds of standards to the wireless generation, or 3G-3. while the other is a standard W-CDMA.

Wideband Code-Division Multiple Access or Wideband-written regular CDMA or W-CDMA, a third generation technology (3G) to GSM, UMTS is also normal (Universal Mobile Telecommunication System). This technology is not compatible with the CDMA2000 or often also called the CDMA only.

WCDMA can reach speed of 384 kbps and in the akan datang akan may be increased up to around 10Mbps.

This technology uses Wideband-AMR (adaptive multi-rate) for the codification voice (voice codec) so that the sound quality to be better than the previous generation.