Solution Unlock Huawei

Why do many people fail in doing flash or unlock huawei ?

This article I want to give a bit of experience and also had a theory of flashing Huawei phone.
Most of us are failing due to a halt during a flash, so flashing is not done perfectly, so we phone flash or unlock a death total.

How to avoid it?

1. Use Pure Serial cable from a PC Com port (DB-9), and remember the cable must be connected to the       voltage Vcc, either external or we can simply take the USB Vcc.
2. If you find that our computer device or a laptop does not have a serial port, use USB to serial cable is correct. Use the cable that had been converted from a DKU-5 with type S / N: WT048000317, because this type of cable has been using the output from the USB Vcc. If you change yourself DKU-5 cable into your Huawei data cable is only necessary to connect all 4 cables, others you can ignore. ( Fig. you can download the or ).
3. Use the correct driver, because the moment you enter the USB cable to the computer will be detected by the computer as new hardware with a request to the USB to Serial cable driver, you can download yourself in or .
4. If the driver is installed you should check the Com ports via device manager control panel system. The position of the right port must be less than com 5, if more than 5 com you should remove it manually.

If you have a phone Huawei had already died because of flash, you actually can still flash back, because usually if you flash the wrong computer can still detect phone, or by pressing the # key + 2 + at the same power that is in a position phone download mode.
To erase files and repair your Huawei can download for free at or .
*** Mistakes are learning to succeed.

No comments: